Harris Used Equipment

• Harris HRB-N Two Ram Baler with LID

  

  This HRB-N two ram baler produces a bale apporximately 44" x 30" x 62". I has two (2) 75HP motors, features hydraulic pre-compression Lid Combo Door (Bale Separation/Bale Overcharge) and completely relined in February 2009. For more information please contact Jeff Ham or call 615.672.3272.

• HP Series 6100 - Horizontal Baler

  

  Machine info

  Bale Size	43.5" wide x 43.5" high x variable
  Bale Volume	80 cubic feet expanded (aprox. 72" long)
  Charge Box Opening	41.5" x 60"
  Wire Tie Cycle	15 sec
  System Pressure	5000PSI

  • 5267 operating hours
  • Factory Refurbished and Tested with a 60 day limited warranty.
  • HP-6100 75 HP 460V.
  • Inserter Left (Left Hand machine).
  • Hopper extension 3 sided for conveyor infeed Right.
  • Conveyor Controls 10HP.
  • Oil cooler, oil heater, high temp/low oil alarm.
  • Flanged mounted disconnect with re-settable breaker in lieu of fused disconnect.

  Please contact your local Harris Sales Manager if you are interested. Or, fill out the form on the right and someone from Harris will contact you!

• HRB1045w - Two-Ram Baler

  Machine Info

  Press Box	55" x 35.5" x 171.5"
  Hopper Opening	74" x 120"
  Bale Volume	53 cubic ft.
  Bale Weight (average)	3000-3500 lbs.
  Compression Chamber	45" x 37" x 55"
  Hourly Capacity	36-42 tons/hr.

  The HRB is the flagship of the two-ram baler line from Harris. The HRB1045w is perfect to bale shredded or unshredded solid waste. Contact your local Harris Sales Manager if you are interested. Or, fill out the form on the right and someone from Harris will contact you!